Skip to content

MaTouch ESP32-P4 TFT with Touch 7"

1.Introduction

2.Features

  • Controller: ESP32-P4NRW32
  • Flash: 16MB Flash
  • PSRAM: 32MB
  • Wireless: 2.4GHz Wi-Fi 6 (802.11ax)，Bluetooth® 5 (LE)(ESP32-C6FH4)
  • LCD: 7", 1024x600 resolution
  • LCD Driver: JD9165
  • LCD interface: MIPI
  • Touch Panel: 5 Points Touch, Capacitive
  • Touch Panel Driver: GT911
  • USB: 1 * USB to UART, 1 * USB_NATIVE, 1 * USB_CDC/JTAG, 1 * USB_OTG, 1 * USB_DEVICE,
  • Power Supply: USB Type-C 5.0V(4.0V~5.25V)
  • Button: Flash button and reset button
  • Camera Maximum Resolution: 2 Million Pixels, 1920H×1080V
  • Camera interface: MIPI
  • Ethernet: IP101GRI
  • Microphone input: Yes
  • Audio output: ES8311
  • MicroSD: Yes
  • Charger: Yes
  • Battery Connector: Yes
  • Expansion interface: 26 * GPIO
  • Arduino support: Yes
  • LVGL support: Yes

3.Usage

Before you begin, please ensure that esp-idf is installed on your computer. If not，click Get Started with esp-idf to complete the installation.